English
हिन्दीSTRUCTURAL TECHNOLOGICAL DIVISION
SENIOR PRINCIPAL SCIENTIST (10)
NAGARAJAPPA B
NARAYANA R
DR. SIVA SUBBA RAO P
AMIT KUMAR ONKAR DR
CHANDRA N DR
NARENDRA M S
SHIVAPRASAD M V
DWARAKANATHAN D
SATHIYA NAARAYAN S DR
Amit Kumar Onkar Dr
Facilities
DR.RAJA SAMIKKANNU
Dr. Raja Samikkannu is holding MTech (IIT-Bombay) and PhD (IIT- Kharagpur) degrees in Aerospace Engineering. He was a DAAD research fellow at DLR-…
MoreDR.RAJA SAMIKKANNU is working on Techniques
DR.RAJA SAMIKKANNU is working on Facilities
JAIDEV VYAS J
Mr. Jaidev Vyas has Bachelor’s degree in Mechanical Engineering from JNTU (2006), Hyderabad and Master’s degree in Thermal Engineering from NIT,…
MoreJAIDEV VYAS J is working on Techniques
JAIDEV VYAS J is working on Facilities
DEEPA SAKRAVARTHINI
Ms. Deepa Sakravarthini has a Master’s degree (2006) in Structural Engineering from Coimbatore Institute of Technology, Coimbatore. She has joined…
MoreDEEPA SAKRAVARTHINI is working on Techniques
DEEPA SAKRAVARTHINI is working on Facilities
BASKAR RAO MATTAPALLY
Mr. Baskar Rao Mattapally obtained Master’s degree from IIT Roorkee, in Machine Design Engineering (2004) and B.Tech. in Mechanical Engineering from…
MoreBASKAR RAO MATTAPALLY is working on Techniques
BASKAR RAO MATTAPALLY is working on Facilities
ARUN KUMAR A
Mr. Arun Kumar graduated B.E. (Aeronautical Engineering) from Madras Institute of Technology in 2008 and M.Tech (Engineering of Aerospace Structures…
MoreARUN KUMAR A is working on Techniques
ARUN KUMAR A is working on Facilities
VINOD KUMAR K
Mr. K. Vinod Kumar has Bachelor’s degree (2001) in Mechanical Engineering from Coimbatore Institute of Technology (CIT), Bharathiyar University…
MoreVINOD KUMAR K is working on Techniques
VINOD KUMAR K is working on Facilities
SHARAD KUMAR
Sharad Kumar went to Army Public School and completed his Bachelor of Engineering in Mechanical Engineering at M.S. Ramaiah Institute of Technology…
MoreSHARAD KUMAR is working on Techniques
SHARAD KUMAR is working on Facilities
SHANTHINI G
Ms. G. Shanthini is currently working as a Scientist in Structural Technologies Division, CSIR-National Aerospace Laboratories (NAL), Bangalore. She…
MoreSHANTHINI G is working on Techniques
SHANTHINI G is working on Facilities
SAHOO P K DR
Dr P.K. Sahoo is currently working as a Principal Scientist at Structural Technological Division (STTD), CSIR-NAL (April 1999 till date). He is also…
MoreSAHOO P K DR is working on Techniques
SAHOO P K DR is working on Facilities
MUTTURAJ H MEDAR
Completed M.Tech. in Mechanical Engineering from NITK, Surathkal. Presently working in the area of experimental Aeroelasticity, structural dynamics,…
MoreMUTTURAJ H MEDAR is working on Techniques
MUTTURAJ H MEDAR is working on Facilities
MAHESH KADAM
Mr. Mahesh Kadam has obtained Bachelor’s degree in Mechanical Engineering from UVCE, Bengaluru (2004), and Master’s degree in Machine Design from BMS…
MoreMAHESH KADAM is working on Techniques
MAHESH KADAM is working on Facilities
CHETAN S JARALI DR
Dr. Chetan S. Jarali received his Doctor of Philosophy in Micromechanics and Modelling of High Performance Adaptive Shape memory Composites with …
MoreCHETAN S JARALI DR is working on Techniques
CHETAN S JARALI DR is working on Facilities
BALAMURUGAN G DR
Dr Balamurugan Gopalsamy has obtained Bachelors (1991) and Master Degrees (1995) in Mechanical Engineering from College of Engineering, Guindy,…
MoreBALAMURUGAN G DR is working on Techniques
BALAMURUGAN G DR is working on Facilities
BALAKRISHNAN B
Dr. Balakrishnan Bakthavatchalam is currently working as Principal Scientist at CSIR National Aerospace Laboratories, Bangalore & Associate…
MoreBALAKRISHNAN B is working on Techniques
BALAKRISHNAN B is working on Facilities
SURYA NARAYANAN L
Mr.Surya Narayanan obtained his Bachelor’s degree in Mechanical Engineering from Visvesvaraya Technological University, Belgaum (2010) and Master’s…
MoreSURYA NARAYANAN L is working on Techniques
SURYA NARAYANAN L is working on Facilities
Gajendra D G
Mr. Gajendra D. G. obtained his MS in Mechanical Engineering from University of Texas at Arlington, TX, USA with minor: Design optimization,…
MoreGajendra D G is working on Techniques
Gajendra D G is working on Facilities
Dr MANJU S
Mrs. Manju joined the Structural Technologies Division, CSIR-NAL, as a Scientist in November 1996. Her areas of work in Structural Technologies…
MoreDr MANJU S is working on Techniques
Dr MANJU S is working on Facilities
Amit Kumar Onkar Dr is working on Techniques
Amit Kumar Onkar Dr is working on Facilities
SATHIYA NAARAYAN S DR
Qualifications BE Civil and Structures- Annamalai University. ME Civil –BITS Pilani. Phd Applied Mechanics- IIT Madras, Chennai…
MoreSATHIYA NAARAYAN S DR is working on Techniques
SATHIYA NAARAYAN S DR is working on Facilities
DWARAKANATHAN D
Mr. Dwarakanathan D has M.E. degree in structural engineering with 15 years of industrial/ research experience at STTD, CSIR-NAL. He has contributed…
MoreDWARAKANATHAN D is working on Techniques
DWARAKANATHAN D is working on Facilities
SHIVAPRASAD M V
Mr. M V Shivaprasad is working as a Scientist at Structural Technologies Division of CSIR-National Aerospace Laboratories, Bangalore, India. He has…
MoreSHIVAPRASAD M V is working on Techniques
SHIVAPRASAD M V is working on Facilities
NARENDRA M S
Mr. Narendra M S has a Bachelor of Engineering degree in Mechanical Engineering from BIET, Davangere (2000) and Masters in Aerospace Engineering…
MoreNARENDRA M S is working on Techniques
NARENDRA M S is working on Facilities
CHANDRA N DR
Dr. N. Chandra obtained his B.E. in Mechanical Engineering from Visvesvaraya Technological University and M.Tech. in Aerospace Engineering from…
MoreCHANDRA N DR is working on Techniques
CHANDRA N DR is working on Facilities
AMIT KUMAR ONKAR DR
Dr Amit Kumar Onkar obtained his MTech & PhD degrees in Aerospace Engineering from Indian Institute of Technology Kanpur in 2008. He then…
MoreAMIT KUMAR ONKAR DR is working on Techniques
AMIT KUMAR ONKAR DR is working on Facilities
DR. SIVA SUBBA RAO P
Presently working as Principal Scientist in Structural Technologies Division, CSIR-NAL, Bengaluru. Obtained M.Tech Computers Electronics in 1998…
MoreDR. SIVA SUBBA RAO P is working on Techniques
DR. SIVA SUBBA RAO P is working on Facilities
NARAYANA R
Aerospace engineering graduate from Indian Institute of Science, Bengaluru and having sound knowledge & expertise in the domain of Airframe…
MoreNARAYANA R is working on Techniques
NARAYANA R is working on Facilities
NAGARAJAPPA B
Mr. Nagarajappa B is working as a Senior Scientist at Structural Technologies Division of CSIR-National Aerospace Laboratories, Bangalore, India. He…
MoreNAGARAJAPPA B is working on Techniques
NAGARAJAPPA B is working on Facilities
SATHYANARAYANA C N DR
Dr C.N.Sathyanarayana obtained his B.E. in Mechanical Engineering from Mysore university and M.E. in Machine Design from Bangalore University.…
MoreSATHYANARAYANA C N DR is working on Techniques
SATHYANARAYANA C N DR is working on Facilities
PAVAN KUMAR D V T G DR
Dr. Pavan Kumar has a Masters Degree (1993) and a Doctoral Degree (1999) in Engineering from Indian Institute of Science (IISc), Bangalore. He has…
MorePAVAN KUMAR D V T G DR is working on Techniques
PAVAN KUMAR D V T G DR is working on Facilities
MANJUPRASAD M DR
Dr M. Manjuprasad obtained his PhD (Engineering) from IISc, Bengaluru in the area of Structural Engineering. He was associated with CSIR-Structural…
MoreMANJUPRASAD M DR is working on Techniques
MANJUPRASAD M DR is working on Facilities
STATIC AND DYNAMIC FULL FIELD NON-CONTACT STRAIN MEASUREMENT USING 3D DIGITAL IMAGE CORRELATION SYSTEM
STATIC AND DYNAMIC FULL FIELD NON-CONTACT STRAIN MEASUREMENT USING 3D DIGITAL IMAGE CORRELATION SYSTEM
More
Static and Dynamic Full Field Non-contact Strain Measurement using 3D Digital Image Correlation System
Year of Establishment : 2014
VIBRO-ACOUSTIC TEST FACILITY
VIBRO-ACOUSTIC TEST FACILITY
More
Vibro-acoustic Test Facility
Year of Establishment : 2014
Test Application : Aircraft and automotive panels,
3D PRINTING FACILITY
3D PRINTING FACILITY
More
3D Printing Facility
Year of Establishment : 2016
Test Application : 3D printing for components & assembly (polymers), Low speed wind tunnel model
SIX DOF MOTION PLATFORM TEST FACILITY
SIX DOF MOTION PLATFORM TEST FACILITY
More
Six DOF Motion Platform test facility
Year of Establishment : 2017
Test Application : Aircraft and automotive Fuel tank slosh simulation
COMPUTER CONTROLLED VIBRATION QUALIFICATION TEST FACILITY
COMPUTER CONTROLLED VIBRATION QUALIFICATION TEST FACILITY
More
Computer Controlled Vibration Qualification Test Facility
Year of Establishment : 2000
Test Application : Aircraft subsystems, Automotive and rail systems
GROUND VIBRATION TEST FACILITY
GROUND VIBRATION TEST FACILITY
More
Ground Vibration Test Facility
Year of Establishment: 2002
Test Application: Modal testing of aircraft, aerospace structures and automotive systems
IN-FLIGHT VIBRATION MEASUREMENT AND FLUTTER TEST FACILITY
IN-FLIGHT VIBRATION MEASUREMENT AND FLUTTER TEST FACILITY
More
In-flight vibration Measurement and Flutter Test Facility
Year of Establishment : 2007
Test Application : Aircraft
MATERIAL EVALUATION TESTING
NON - LINEAR STRUCTURAL ANALYSIS
NON - LINEAR STRUCTURAL ANALYSIS
More
Non - Linear Structural Analysis
ACD is immensely involved in finite element solution techniques for providing solutions for wide range of static, dynamic, buckling, opti
Last updated on : 16-01-2022 11:21:48pm