Polyol mediated synthesis of tungsten trioxide and Ti doped tungsten trioxide

Polyol mediated synthesis of tungsten trioxide and Ti doped tungsten trioxide

Part 1: Synthesis and characterisation of the precursor material

P. Porkodi, V. Yegnaraman,  D. Jeyakumar

Materials Research Bulletin 41 (2006) 1476–1486

https://doi.org/10.1016/j.materresbull.2006.01.030

 

Abstract

Polyol mediated synthesis for the preparation of tungsten trioxide and titanium doped tungsten trioxide has been reported. The reaction was carried out using chlorides of tungsten and titanium in diethylene glycol medium and water as the reagent for hydrolysis at 190 °C. Formation of a blue coloured dimensionally stable suspension of the precursor materials was observed during the course of the reaction. The particle sizes of the precursor materials were observed to be around 100 nm. The precursor materials were annealed to give tungsten trioxide and titanium doped tungsten trioxide. The precursor materials were characterised using TGA/DTA, FT-IR, optical spectra, SEM, TEM and powder XRD methods. It was observed that the doping of titanium could be effected at least up to 10% of Ti in WO3. The TGA/DTA studies indicated that WO3−x·H2O is the dominant material that formed during the polyol mediated synthesis. The XRD data of the annealed samples revealed that the crystalline phase could be manipulated by varying the extent of titanium doping in the tungsten trioxide matrix.


Last updated on : 21-11-2017 11:29:18am