STRUCTURAL TECHNOLOGIES DIVISION

CHIEF SCIENTIST (3)

MANJUPRASAD M DR
PAVAN KUMAR D V T G DR
RAJAGOPAL R S

HEAD

RAJA SAMIKKANNU

JOINT HEAD

SATHYANARAYANA C N DR

SENIOR PRINCIPAL SCIENTIST (7)

ACHUTHAN C PANKAJ
NAGARAJAPPA B
NARAYANA R
RAJU J DR
SIVA SUBBA RAO P
CHANDRA N DR
DWARAKANATHAN D

DEPUTY HEAD

MANJU S

PRINCIPAL SCIENTIST (16)

AMIT KUMAR ONKAR DR
BALAKRISHNAN B
BALAMURUGAN G DR
CHETAN S JARALI DR
GANESH MADHURANATH
MAHESH KADAM
MUTTURAJ H MEDAR
NARENDRA M S
SAHOO P K DR
SHANTHINI G
SHARAD KUMAR
SHIVAPRASAD M V
VINOD KUMAR K
ARUN KUMAR A
ASHWIN U
BASKAR RAO MATTAPALLY

SENIOR SCIENTIST (5)

DEEPA SAKRAVARTHINI
JAIDEV VYAS J
SAI KIRAN P V R
SATHIYA NAARAYAN S DR
SURYA NARAYANAN L

SCIENTIST

SATHISH S

TECHNIQUES

RAJA SAMIKKANNU

Dr. Raja Samikkannu is holding MTech (IIT-Bombay) and PhD (IIT- Kharagpur) degrees in Aerospace Engineering. He was a DAAD research fellow at DLR-…

More

RAJA SAMIKKANNU is working on Techniques

RAJA SAMIKKANNU is working on Facilities

BASKAR RAO MATTAPALLY

I obtained Master’s degree from IIT Roorkee, in Machine Design Engineering (2004) and B.Tech. in Mechanical Engineering from University College of…

More

BASKAR RAO MATTAPALLY is working on Techniques

BASKAR RAO MATTAPALLY is working on Facilities

ASHWIN U

Mr. Ashwin U. did his Master’s Degree in Machine Design and Bachelor’s Degree in Mechanical Engineering from Visvesvaraya Technological University,…

More

ASHWIN U is working on Techniques

ASHWIN U is working on Facilities

ARUN KUMAR A

Mr. A Arun Kumar graduated B.E. (Aeronautical Engineering) from Madras Institute of Technology (Anna University) in 2008 and M.Tech (Engineering of…

More

ARUN KUMAR A is working on Techniques

ARUN KUMAR A is working on Facilities

VINOD KUMAR K

Mr. K. Vinod Kumar has Bachelor’s degree (2001) in Mechanical Engineering from Coimbatore Institute of Technology (CIT), Bharathiyar University…

More

VINOD KUMAR K is working on Techniques

VINOD KUMAR K is working on Facilities

SHIVAPRASAD M V

Mr. M V Shivaprasad is working as a Scientist at Structural Technologies Division of CSIR-National Aerospace Laboratories, Bangalore, India. He has…

More

SHIVAPRASAD M V is working on Techniques

SHIVAPRASAD M V is working on Facilities

SHARAD KUMAR

Sharad Kumar went to Army Public School and completed his Bachelor of Engineering in Mechanical Engineering at M.S. Ramaiah Institute of Technology…

More

SHARAD KUMAR is working on Techniques

SHARAD KUMAR is working on Facilities

SHANTHINI G

Ms. G. Shanthini is currently working as a Scientist in Structural Technologies Division, CSIR-National Aerospace Laboratories (NAL), Bangalore. She…

More

SHANTHINI G is working on Techniques

SHANTHINI G is working on Facilities

SAHOO P K DR

Dr. P.K. Sahoo is currently working as a Senior scientist at Structural Technologies Division (STTD), CSIR-NAL. Additionally, he is also Faculty (…

More

SAHOO P K DR is working on Techniques

SAHOO P K DR is working on Facilities

NARENDRA M S

 Mr. Narendra M S has a Bachelor of Engineering degree in Mechanical Engineering from BIET, Davangere (2000) and Masters in Aerospace Engineering…

More

NARENDRA M S is working on Techniques

NARENDRA M S is working on Facilities

MUTTURAJ H MEDAR

Completed M.Tech. in Mechanical Engineering from NITK, Surathkal. Presently working in the area of experimental Aeroelasticity, structural dynamics,…

More

MUTTURAJ H MEDAR is working on Techniques

MUTTURAJ H MEDAR is working on Facilities

MAHESH KADAM

Mr. Mahesh Kadam has obtained Bachelor’s degree in Mechanical Engineering from UVCE, Bengaluru (2004), and Master’s degree in Machine Design from BMS…

More

MAHESH KADAM is working on Techniques

MAHESH KADAM is working on Facilities

GANESH MADHURANATH

Mr. Ganesh Madhuranath is an experienced Design and Analysis Professional and has worked in Aerospace and Mechanical Industries. He holds a One year…

More

GANESH MADHURANATH is working on Techniques

GANESH MADHURANATH is working on Facilities

CHETAN S JARALI DR

Dr. Chetan S. Jarali received his Doctor of Philosophy in Micromechanics and Modelling of High Performance Adaptive Shape memory Composites with  …

More

CHETAN S JARALI DR is working on Techniques

CHETAN S JARALI DR is working on Facilities

BALAMURUGAN G DR

Dr Balamurugan Gopalsamy  has obtained Bachelors (1991) and Master Degrees (1995) in Mechanical  Engineering from College of Engineering, Guindy,…

More

BALAMURUGAN G DR is working on Techniques

BALAMURUGAN G DR is working on Facilities

BALAKRISHNAN B

Mr. Balakrishnan B is currently working as scientist. His main interest are in the area of Finite Element Analysis (FEA) of Aircraft and Aerospace…

More

BALAKRISHNAN B is working on Techniques

BALAKRISHNAN B is working on Facilities

AMIT KUMAR ONKAR DR

Dr Amit Kumar Onkar obtained his MTech & PhD degrees in Aerospace Engineering from Indian Institute of Technology Kanpur in 2008. He then joined…

More

AMIT KUMAR ONKAR DR is working on Techniques

AMIT KUMAR ONKAR DR is working on Facilities

SURYA NARAYANAN L

Mr.Surya Narayanan obtained his Bachelor’s degree in Mechanical Engineering from Visvesvaraya Technological University, Belgaum (2010) and Master’s…

More

SURYA NARAYANAN L is working on Techniques

SURYA NARAYANAN L is working on Facilities

SATHIYA NAARAYAN S DR

Qualifications   BE Civil and Structures- Annamalai University. ME Civil –BITS Pilani. Phd Applied Mechanics- IIT Madras, Chennai…

More

SATHIYA NAARAYAN S DR is working on Techniques

SATHIYA NAARAYAN S DR is working on Facilities

SAI KIRAN P V R

P V R SAI KIRAN is currently working as scientist in CSIR- National Aerospace Laboratories, India. He received his M.Tech in Machine Drives &…

More

SAI KIRAN P V R is working on Techniques

SAI KIRAN P V R is working on Facilities

JAIDEV VYAS J

Mr. Jaidev Vyas has Bachelor’s degree in Mechanical Engineering from JNTU (2006), Hyderabad and Master’s degree in Thermal Engineering from NIT,…

More

JAIDEV VYAS J is working on Techniques

JAIDEV VYAS J is working on Facilities

DEEPA SAKRAVARTHINI

Ms. Deepa Sakravarthini has a Master’s degree (2006) in Structural Engineering from Coimbatore Institute of Technology, Coimbatore. She has joined…

More

DEEPA SAKRAVARTHINI is working on Techniques

DEEPA SAKRAVARTHINI is working on Facilities

SATHISH S

Sathish has obtained his Bachelor’s Degree in Aeronautical Engineering from Madras Institute of Technology, Chennai and Master’s Degree in Aerospace…

More

SATHISH S is working on Techniques

SATHISH S is working on Facilities

MANJU S

Mrs. Manju joined the Structural Technologies Division, CSIR-NAL, as a Scientist in November 1996. Her areas of work in Structural Technologies…

More

MANJU S is working on Techniques

MANJU S is working on Facilities

DWARAKANATHAN D

Mr. Dwarakanathan D has M.E. degree in structural engineering with 15 years of industrial/ research experience at STTD, CSIR-NAL. He has contributed…

More

DWARAKANATHAN D is working on Techniques

DWARAKANATHAN D is working on Facilities

CHANDRA N DR

Dr. N. Chandra obtained his B.E. in Mechanical Engineering from Visvesvaraya Technological University and M.Tech. in Aerospace Engineering from…

More

CHANDRA N DR is working on Techniques

CHANDRA N DR is working on Facilities

SIVA SUBBA RAO P

Presently working as Principal Scientist in Structural Technologies Division, CSIR-NAL, Bengaluru. Obtained M.Tech Computers Electronics in 1998…

More

SIVA SUBBA RAO P is working on Techniques

SIVA SUBBA RAO P is working on Facilities

RAJU J DR

Dr. Raju J received his Diploma in Civil Engineering (First class with Distinction). Later Completed Bachelor of Civil Engineering (First class with…

More

RAJU J DR is working on Techniques

RAJU J DR is working on Facilities

NARAYANA R

Aerospace engineering graduate from Indian Institute of Science, Bengaluru and having sound knowledge & expertise in the domain of Airframe…

More

NARAYANA R is working on Techniques

NARAYANA R is working on Facilities

NAGARAJAPPA B

Mr. Nagarajappa B is working as a Senior Scientist at Structural Technologies Division of CSIR-National Aerospace Laboratories, Bangalore, India. He…

More

NAGARAJAPPA B is working on Techniques

NAGARAJAPPA B is working on Facilities

ACHUTHAN C PANKAJ

Shri.Achuthan C. Pankaj received his BE degree in mechanical engineering from the University of Pune, India, in 1997 and his ME degree in mechanical…

More

ACHUTHAN C PANKAJ is working on Techniques

ACHUTHAN C PANKAJ is working on Facilities

SATHYANARAYANA C N DR

Dr C.N.Sathyanarayana obtained his B.E. in Mechanical Engineering from Mysore university and M.E. in Machine Design from Bangalore University.…

More

SATHYANARAYANA C N DR is working on Techniques

SATHYANARAYANA C N DR is working on Facilities

RAJAGOPAL R S

EDUCATION: Degree - B E Civil Engineering and Masters - M E Structural Engineering ENGINEERING ACTIVITIES: Design and Analysis of Aircraft…

More

RAJAGOPAL R S is working on Techniques

RAJAGOPAL R S is working on Facilities

PAVAN KUMAR D V T G DR

Dr. Pavan Kumar has a Masters Degree (1993) and a Doctoral Degree (1999) in Engineering from Indian Institute of Science (IISc), Bangalore. He has…

More

PAVAN KUMAR D V T G DR is working on Techniques

PAVAN KUMAR D V T G DR is working on Facilities

MANJUPRASAD M DR

Dr M. Manjuprasad obtained his PhD (Engineering) from IISc, Bengaluru in the area of Structural Engineering. He was associated with CSIR-Structural…

More

MANJUPRASAD M DR is working on Techniques

MANJUPRASAD M DR is working on Facilities

STATIC AND DYNAMIC FULL FIELD NON-CONTACT STRAIN MEASUREMENT USING 3D DIGITAL IMAGE CORRELATION SYSTEM

STATIC AND DYNAMIC FULL FIELD NON-CONTACT STRAIN MEASUREMENT USING 3D DIGITAL IMAGE CORRELATION SYSTEM

Static and Dynamic Full Field Non-contact Strain Measurement using 3D Digital Image Correlation System

Year of Establishment    : 2014

More

SCIENTISTS WORKING ON STATIC AND DYNAMIC FULL FIELD NON-CONTACT STRAIN MEASUREMENT USING 3D DIGITAL IMAGE CORRELATION SYSTEM

VIBRO-ACOUSTIC TEST FACILITY

VIBRO-ACOUSTIC TEST FACILITY

Vibro-acoustic Test Facility

Year of Establishment    :  2014

Test Application  :  Aircraft and automotive panels,

More

SCIENTISTS WORKING ON VIBRO-ACOUSTIC TEST FACILITY

3D PRINTING FACILITY

3D PRINTING FACILITY

3D Printing Facility

Year of Establishment : 2016

Test Application : 3D printing for components & assembly (polymers), Low speed wind tunnel model

More

SCIENTISTS WORKING ON 3D PRINTING FACILITY

SIX DOF MOTION PLATFORM TEST FACILITY

SIX DOF MOTION PLATFORM TEST FACILITY

Six DOF Motion Platform test facility

Year of Establishment    : 2017

Test Application : Aircraft and automotive Fuel tank slosh simulation

More

SCIENTISTS WORKING ON SIX DOF MOTION PLATFORM TEST FACILITY

COMPUTER CONTROLLED VIBRATION QUALIFICATION TEST FACILITY

COMPUTER CONTROLLED VIBRATION QUALIFICATION TEST FACILITY

Computer Controlled Vibration Qualification Test Facility

Year of Establishment : 2000

Test Application : Aircraft subsystems, Automotive and rail systems

More

SCIENTISTS WORKING ON COMPUTER CONTROLLED VIBRATION QUALIFICATION TEST FACILITY

GROUND VIBRATION TEST FACILITY

GROUND VIBRATION TEST FACILITY

Ground Vibration Test Facility

Year of Establishment: 2002

Test Application: Modal testing of aircraft, aerospace structures and automotive systems

More

SCIENTISTS WORKING ON GROUND VIBRATION TEST FACILITY

IN-FLIGHT VIBRATION MEASUREMENT AND FLUTTER TEST FACILITY

IN-FLIGHT VIBRATION MEASUREMENT AND FLUTTER TEST FACILITY

In-flight vibration Measurement and Flutter Test Facility

Year of Establishment  : 2007

Test Application  : Aircraft

More

SCIENTISTS WORKING ON IN-FLIGHT VIBRATION MEASUREMENT AND FLUTTER TEST FACILITY

MATERIAL EVALUATION TESTING

MATERIAL EVALUATION TESTING

Material Evaluation testing

Year of Establishment    :

More

SCIENTISTS WORKING ON MATERIAL EVALUATION TESTING

Last updated on : 12-11-2020 07:11:22pm